-
Video Instructions
Episode #3 - How to Polish Silverware using Cape Cod Polishing Cloths
In this polishing tip we polish silverware using Cap Cod Metal Polishing Cloths. The cloths are individually packaged in an attractive tin that includes a pair of reusable gloves and a buffing cloth.
Get the Flash Player to see this player.
Materials Used:
- Cape Cod Metal Polishing Cloths in the Economy Size Can
- Cape Cod Horse Hair Detail Brush
- Microfiber cloth
- Cape Cod Metal Polishing Cloths in the Industrial Size Can ( Optional )
Instructions and Application :
1. Remove a pre-moistened Cape Cod Metal Polishing Cloth & rub tarnished silverware gently. For tougher jobs rub harder.
2. Wipe polish off while still wet with the enclosed buffing cloth.
3. Return the polish cloth into the packet and place in can for future use. The polish cloth can be used over and over again however discolored it becomes.
4. After buff drying your silverware, wash with a mild detergent, rinse and dry. This will not reduce the shine or protection.
 |
Polish Guy Tip : “Cape Cod Metal Polishing Cloths have the polish pre-applied to them and have a pleasant vanilla fragrance. Should any of the cloths become dry, a few drops of mineral spirits or vegetable oil will revitalize them. “ |
Optional - Use of a Cape Cod Detail Brush and Microfiber Cloth.
1. If any polish remains in intricate detailed embossed patterns of your silverware, use a Cape Cod Horse Hair Detail Brush, to clean it right out. The horse hair brushes are soft and gentle, an effective way to help get the most from your polishing effort.
2. For a mirror finish shine use a microfiber cloth and rub briskly.
|
Polish Guy Tip : “Cape Cod Metal Polishing Cloths have an anti-tarnishing formula, which significantly stretches time between required polishing. The cloths work well on silver, gold, brass, copper, nickel, pewter, aluminum & stainless steel.” |
Before and After:
 |
 |
Episode #2 - How to Clean a Headlight Using Autosol Polish
In this polishing tip we clean a headlight from a Ford F150 using Autosol metal polish. The video includes polishing instructions for cleaning a car or truck headlight by hand as well as using a drill with a buffing wheel.
Get the Flash Player to see this player.
Materials Used:
- Autosol polish in a 3.3 ounce tube
- Micro Fiber Cloth
- Pair of nitrile gloves
- Autosol Headlight Refinishing Kit ( Optional )
Instructions and Application :
1. Apply a small amount of Autosol evenly on the headlight lens with your gloved finger tips.
2. Rub the paste in a circular motion with a micro fiber cloth.
3. Turn over the micro fiber cloth and wipe all the polish off and buff to a shine.
4. Continue around the headlight lens until finished.
|
Polish Guy Tip : “Mask off your lights with easy release low tack painters tape to avoid accidental damage to surrounding areas of your vehicle.” |
Optional - Use the buffing wheel included in the Autosol Headlight Refinishing Kit
1. Apply Autosol polish evenly on the headlight with the fingertips of your nitrile glove.
2. With the buffing wheel on your cordless power drill, slowly buff the polish so that it does not splatter.
3. Let the buffing wheel do the work using low speeds and polishing at 90 degree angles.
|
Polish Guy Tip : “Watch for heat build up that could distort your headlight lens caused by excessive pressure on the buffing wheel. This is usually not a problem, but it is good to be aware of it. “ |
Before and After:
 |
Knife Care Maintenance For You & Your Knife
Using Flitz polish on knives and cutlery is very popular. There is an excellent video included with this post by Cutlery Lover Productions that is running on YouTube. Knife Care and Maintenance : Flitz Polish It is a bit lengthy but shows good technique and makes strong points on knife safety that can not be emphasized too much. It is that single time that you lose your concentration that causes those nasty cuts.
|
Polish Guy Tip : “I would recommend that you wash any cutlery or other item that may come in contact with any food or beverage. A good way is to use some warm soapy water, rinse and then dry the item.“ |
However as stated in the video that all polishes are toxic may be an over statement. In fact, “Ollie” ( Ulrich Jentsch ) President of Flitz International, claims that his polish is perfectly safe and not harmful, on his dealer training videos. Neither he or I would recommend that you eat it, but Flitz does in fact sport a USDA label on its Flitz Metal, Plastic & Fiberglass Polish and Paint Restorer. I believe Flitz may well be the only polish that does have it. The Flitz 2 pound can has the USDA Authorized label printed right on it. The Flitz 1.76 and Flitz 5.29 ounce tubes have it printed on the box or blister packaging. So you may not see the label on tube itself. Flitz polish that is in tubes is not a liquid as stated in the video, it has the consistency more of toothpaste. There is in fact a Flitz Liquid Polish, but it is packaged in a bottle. On the label on the back of the new black bottles toward the bottom by the bar code is printed USDA Authorized.
A last thought on keeping safe ( in case you need a reminder ) is an interesting post on BladeForums.com “The Leading Edge of Knife Discussions”, posted by DRider . An entry including a picture, post emergency room visit, of what can happen to you with a sharp knife blade. Honey… could you come in here? Now?
Simichrome Shines the Southport, NC Historical Society Cannon
Simichrome polish is used to polish the solid bronze barrel of a full scale replica of an 1841 six pound cannon owned by Southport, NC Historical Society. The cannon is named “Thor” after the mythical god of thunder. The cannon is also a movie star having been featured in Ted Turners “Gods and Generals”.The crew has been trained and certified by the National Civil War Artillery Association. The crew puts on a very nice show and drill prior and after the firing of the gun. They fire the cannon at various events to include weddings, anniversaries, civic events, historical activities, appropriate national holidays, town parades, etc.
The cannon and its crew are available for hire for public and private firings. Take a look at a couple of recent pictures during a Memorial Day ceremony.
Materials Used to Polish This Cannon:
 |
 |
|---|
Site Feeds
-
Preferred Product
Recommended Reading
-
Follow us on Twitter!
Rate Our Blog
